Sagem myX3-2 Technical Information download pdf (Page 71)



Proc Sheet 1 02

myX3-2

REMOVING / REPLACING THE DISPLAY

1/2

________________________________________________________________________________________________

Ref. SCT U38 SSC DTS 0014 – Index B - March 30, 2004 Page 5-18

4.26 Tools :

- A 0.6mm torx screwdriver

- gloves

• This procedure must be performed by an technician provided with gloves , to avoid any risk of

pollution.

• Contacts of display must be never touched.

4.27 Preliminary operation

1. Remove the back cover ( Proc sheet 0 01).

2. Remove the battery ( Proc sheet 0 02).

3. Remove the front cover ( Proc sheet 0 03).

4.28 Removal procedure :

1. On the electronic equipped module , unscrew the four attachment screws (4) .

2. Remove the assembly display (2) (3).

1. Remove the display ( 3 ), of the support ( 2 ) by pushing it in its centre .

4.29 Placement procedure :

1. Replace the display (3) of the support (2),beginning with the bottom.

2. Replace the assembly display (2) (3) on the electronic equipped module (1).

3. Position and tighten the four attachments screws with 0,25 N.m torque.

4. Verify that there are no impurities on the display.

4.30 Further operations :

1. Replace the front cover (Proc sheet 0 03).

2. Replace the battery (Proc sheet 0 02).

3. Replace the back cover (Proc sheet 0 01).

4. Carry out the radio test (Test Sheet 06).

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 110 111

No comments

Sagem myX3-2 Technical Information Page 71